ctc a10s 3d models

Print Settings Printer: CTC Replicator Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 15 Notes: I used supports, but they only created 2 lines to the dish. ...If you have active cooling (which I don't yet) You probably won't...

Print Settings Printer: CTC Dual Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm Infill: 10% Notes: 2 Shells Print top with support. Post-Printing Required Battery: Turnigy nano-tech 330mAh for T-REX150 Lasts three times longer...

I printed a support for the "snap nose." Print Settings Printer: CTC Rafts: No Supports: Yes Resolution: 0.2 Infill: 50 Notes: Printed in ABS 2-3 outlines, 3 Bottom Layers, 50% Infill Triangular Orientation: The hook sits on the print bed... ...I...

Here are my print settings for reference: Printer: CTC Rafts: No rafts required Supports: No supports needed Resolution: 0.2 mm precision is key Infill: 100% density for added strength Notes: For the container body, I used a resolution of 0.3mm to...

... modification, I was able to print another copy using the same settings (with raft and supports), and I'm thrilled to report that it turned out perfectly. Printer Settings: Printer: CTC Creator Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 25%

... This doesn't give the same positive click as the original I May work on this in the future, Lets see how much it annoys me. I Printed this on a CTC Bizer running as a Flashforge Creator Pro clone, sliced in flashforge software. ...

These parts were perfectly modeled in AC3D software and they worked seamlessly when printed with my trusty CTC printer. To achieve the best results, it's recommended to print the female part first, verify that it fits a disk snugly, then print the...

Meter Specifications: Size: 1.85 x 0.87 x 1.1 inches (L x W x H) Opening size: 1.77 x 1.02 inches (L x W) Mini Switch Details: Hole Diameter: 5mm Print Settings: Printer: CTC Dual Rafts: None Supports: None Resolution: 0.25mm Infill Percentage: 10%...

Printer settings were as follows: Print Settings Printer: CTC Tuned Rafts: Yes Supports: Yes Resolution: 0.15mm Layer Height Infill: 20% Notes: A raft may be necessary for printing the two-leg stand, based on my experience. ...I made two initial...

Print Settings: Printer: Custom Tooling Company (CTC) Rafts: None Required Supports: Always Engaged for Maximum Stability Resolution: 0.3 mm Per Square Inch for Finest Details Infill: Ten Percent Density Ensures Light yet Strong Design Assembly...

The printed model stands at a tiny 20mm tall, and I was extremely excited when my Chinese-made CTC knockoff MakerBot printer pulled it off without any issues. I printed two together and slowed the travel speed down to an astonishingly low 5ms. ...Moving...

Print Settings Printer: CTC (FlashForge Clone) Rafts: It Doesn't Matter Supports: Not Necessary Resolution: 0.3 Millimeters Infill: 20 Percent Notes: I Haven't Conducted a Test Yet; depending on the Load, it May be Beneficial to Increase Infill or...

Printer Settings Printer: CTC Bizer (Dual) Rafts: You can ignore this setting Supports: Likewise, you can disregard this setting Resolution: Set the resolution as needed based on the design scale Infill: Choose an infill of at least 10% depending on...

Print Settings Rafts: No Supports: No Resolution: 0.2mm Infill: 10% Notes: I printed the part in PLA using a CTC printer with default settings for my specific material (210°C extruder, 60°C bed). Post-Printing Instructions: Simply flip over the...

just too lazy to upload more pics. I printed this in yellow PLA @ 15% infill with my CTC Dual sliced in MakerWare. If you would like to help promote me, please visit my teespring store https://teespring.com/stores/mitzpatrick-fitzsimmons Category:...

If you don't like the smaller original stock ;) Fits tightly on my Umarex/Well MP7A1. Rails: https://www.thingiverse.com/thing:2837495 Flash hider: https://www.thingiverse.com/thing:2840337 Speedplate: https://www.thingiverse.com/thing:2837536 Print...

Rail should fit on all G36 versions. I used M5x0,5 for mounting (JG 608). Short rail: http://www.thingiverse.com/thing:2090888 Standard version: http://www.thingiverse.com/thing:2053074 Print Settings Printer: ctc Rafts: Doesn't MatterSupports:...

Supports: No I printed this part in PLA using my CTC printer and the extruder temperature of 210°C and bed temperature of 60°C, which is standard for my chosen material. Gluing the parts together required some extra effort. I first sanded the wheel...

Double wrench for the faucet aerator: M24x1 AG external thread for water faucets M28x1 AG external thread for bathtub faucets https://en.wikipedia.org/wiki/Faucet_aerator Printed with PLA: No strength issues or scratches from the wrench German key...

It's extremely easy and fast to print, a printing failure is very rare for this model.I printed it using a Prusa i3 MK3S and a CTC Prusa i3 Pro B Rev A, both printers made a good job.Feel free to use Cura or PrusaSlicer's default settings, it's near...

......Innen ist ein Dichtungsring verbaut.</p> <p>Der Dichtungsring hat eine Größe von ca. 15x10x3mm Print Settings Printer: CTC Rafts: YesSupports: Yes Resolution: 0.2Infill: 20% Notes: To save support it could be printed upside-down Category: Parts

... ...I think technically this is my first design from scratch, so be kind.. Edit it online https://www.tinkercad.com/things/ezZNxabq8Se Print Settings Printer: CTC 3D Printer Rafts: No Supports: No Resolution: 0.1mm Infill: 40% Category: 3D Printing

Instructions printed on CTC 3d printer printed in PLA 215C 5% infill 1 shell Since theres no requirement for the foot to be strong, theres no need to waste filament making it strong, all the force is transferred vertically, thus low infill and...

I'm using Nema 23 motor for my current Hypercube Evolution build, so I changed the Z motor mount as well as the Z Nut to match the Dimensions of the bigger motors. Print Settings Printer: CTC Rafts: No Supports: Yes Resolution: 0.2 Infill: 20...

... to hold the old gauge face at the right height and the clockwork mechanism so it is not loose. So I came up with this design to hold it all together. Print Settings Printer: CTC Rafts: No Supports: No Resolution: .20 Infill: 15% Category: DIY

Simple hook to tidy-up the cables under your desk. Print Settings Printer: CTC I3 Rafts: No Supports: No Resolution: 0.28 Infill: 10% Notes: This was printed at 100mm/s (51 minutes total time for 1) and sliced with Cura 3.6 Custom Section...

... Printer Settings Printing Parameters Printer: CTC Rafts: Not applicable as this model does not require raft support. Supports: None required for smooth and accurate printing. Resolution: Printing at optimal resolution to ensure sharp details.

Print Settings Printer: CTC Dual Rafts: Yes Supports: Yes Resolution: 0.1mm Infill: 100% Notes: Horizontal Printing Instructions: Use 10 Shells, No Raft, Yes Support. Vertical Printing Instructions: Use 2 Shells, Yes Raft,...

... suggestions you may have - I'm always eager to hear from fellow fans of fantasy and adventure. Printer Settings: * Printer: CTC * Rafts: No * Supports: No * Resolution: 0.2 * Infill: 30% * Notes: + Printing speed: 35mm/s + Time: 1 hour, 10 minutes

Check out my latest designs at https://www.thingiverse.com/r__/designs Print Settings: Printer: CTC 3D Printer 2.Gen Dual Extruder Rafts: No Supports: No Resolution: 0,2-0,25 Infill: 10% Notes: The box was created to be printable without any need for...