ctc 3dprinter

... Check your x-axis spacing - this was designed for 55mm CTC. ...If you're interested in one, send me a message; I'd be happy to put one together for you, but keep in mind that I have a real job, so patience is required and it may take a few days.

Demonstration: https://www.youtube.com/watch?v=gI5Q4zQnxYk Version 2 Coming Soon: https://www.thingiverse.com/thing:2727584 *Remember to print two side plates and two swivel arms* Socket head bolts required: 9x M8x60 8x M6x50 1x 1/4-20 UNC x 2 1/4...

Print Settings: Printer: ctc rep dual sailfish Rafts: No Supports: Doesn't Matter Resolution: 0.20 / 0.25 Infill: 15 - 25% Notes: Use two shells with 15% infill or one shell with 25% infill, or print at your usual settings. Two print runs are...

Instructions The holder is 3D printed on my CTC Makerbot clone machine using ReplicatorG as the controller and Skeinforge for slicing. I'm using 1.75 mm ABS plastic in a vibrant "AT&T blue" hue. The print settings are: No raft or support needed ...

Printer Settings: Printer: CTC Print in multiple layers to reduce material waste and enhance structural integrity. Matters Most Set layer height to optimize print resolution and minimize...

**Print Settings:** * Printer: CTC * Rafts: None * Supports: Yes * Resolution: 0.1mm **Notes:** These miniatures are already scaled to size, so no adjustments were needed. **Post-Printing Process:** To achieve a smooth finish and eliminate layer...

I've been working on a custom 3D printer idea, and I'm using all the non-3D printable parts from a cheap CTC Prusa clone. Please feel free to use it as you see fit - I'll keep updating until I think it's good. You can use the Fusion360 files I added...

... trouble making the inner holes for the arc approximation right, and it's due to the nozzle dimension. You can try these or just drill them. Print Settings: * Printer: CTC Bizer * Rafts: Doesn't Matter * Supports: Yes * Resolution: 0.2 * Infill: 50%

I successfully integrated this cable chain into my CTC DIY printer using the original screws. If you require alternative mounting solutions, a Sketchup file is provided so that you can create your own custom mounts. Key dimensions include: Radius:...

... top pin wouldn't print due to its small diameter, so I used a barbecue stick. The model comes out at about 400mm long and will fit most print beds. I use a CTC makerbot clone. ... Update: I re-scaled the nose cone and added it on April 13th, 2018.

Key Printing Details: * Printer: Utilized CTC Replicator Dual with standard factory firmware. * Material: High-quality 1.75mm PLA. * Nozzle Size: Precise control using a 0.4mm/0.5mm nozzle configuration. * Build Surface: Achieved optimal adhesion...

Print settings used by John include a CTC dual printer with no rafts or supports, a resolution of 0.2mm, and an infill percentage of 20%. He notes that he used PLA material and had the bed heated during printing. When printing multiple counters...

The can model used in the above renderings is available at: https://grabcad.com/library/coke-can-2012 Print Settings Printer: CTC Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Notes: Printing parts with a resolution higher than 0.2mm may...

I uploaded an improved version of the lid (v3) on 29/07/2019, which is supposed to fit better.\nPrint Settings\nPrinter: \n CTC Prusa I3\n \n Rafts: \n No\n \n Supports: \n No\n \n Resolution: \n 0.4\n \n Infill: \n 10\n \n Notes: \n Depending on...

Print Settings Printer: CTC Bizer Rafts: Doesn't Matter Supports: No Resolution: 0.25 mm Infill: 100 % Notes: When printing with transparent materials, avoid using supports since they will be visible and difficult to remove. Since this model is only...

There are two versions of the torso front (006a and 006d) - 006a is a more 'original' version while 006d has some of the details on the back covered by flat areas (probably any support may damage this parts and I couln't print it completely without...

I also added some connector pins to make the alignment of different parts easyer and strengthen the connections. Which parts do you need to print? Each part 1 time - except the legs (part 002a and 002b), you have to select, which you want, 002b has...

Print Settings: - Printer: CTC - Rafts: No - Supports: No - Resolution: 0.2 layer height with three top/bottom surfaces and two perimeters - Infill: 100% Notes: For optimal results, printing these tokens with 100% infill is recommended to achieve a...

This one doesn't. Print instructionsCategory: Keychains Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2mm Infill: 20% Notes: These settings were used as a homing/test print on the CTC Replicator. Seem to work okay on there with WYZ's...

The mount fits for all handles :) Two different REVISED mounts and structured grip available now! Use M4 nuts and screws. Fully compatible with: http://www.thingiverse.com/thing:2134277 Flash hider: http://www.thingiverse.com/thing:1788943 Charm:...

Everything can be printed, except: two M4 screws and nuts the two rubbers for stabilization plastic adhesive You'll need one "befestigung", one "stabrechts" and one "stablinks". Furthermore you'll need two objects of "stabverbingung", two of...

After assembling "visier" to the helmet, "wangenschutzlinks" and "wangenschutzrechts" should be fixed by the visor. The design is based on the helmet of an optio. PLEASE SCALE FOR PERFECT FIT Inner diameter: 100mm Check out my other designs here on...

Use a M2(9,4 mm) self-tapping screw please. Other versions: https://www.thingiverse.com/thing:2889913 https://www.thingiverse.com/thing:2890069 Cusotm forward assists: https://www.thingiverse.com/thing:2886570...

At the first time do it piecemeal to avoid breaking off the screw at the grip. Three different mounts and grip lengths available! Grips updated for better hold! You can find the picatinny rail here: https://www.thingiverse.com/thing:2481034 Print...

Works well on my JG36 :) Easy print (almost no supports are necessary)! Combinated: http://www.thingiverse.com/thing:2183960 Longer standard version: http://www.thingiverse.com/thing:2183965 Grip: http://www.thingiverse.com/thing:2000846...

If you want to give your FireHawk a special accent without painting you can use this outer barrel cover :) Cusotm forward assists: https://www.thingiverse.com/thing:2886570 https://www.thingiverse.com/thing:2886570 Cusotm boltcatch:...

Here are my print settings: I used my CTC printer for this project. No raft was required for this print. Supports were needed to ensure proper structure and stability. The print resolution was set at 0.2mm. ...Infill density was optimized at 30% to...

The only spool in my collection that doesn't fit is the one included with my CTC Prusa i3 Pro B from an unknown manufacturer. ...Incidentally, "Windows 3D Builder" is a great tool for finding and repairing faulty ".stl" files (from other users, for...

... gave the key some weight, which is essential since you don't want it sliding around everywhere. It took about five hours to print on my CTC Makerbot clone. ...If you prefer, you can use supports, but I found that they weren't necessary in this case.

Print Settings Printer: CTC Bizer Rafts: Doesn't Matter Supports: No Resolution: 0.3 Infill: 100% Notes: For material I chose FormFutura Titan X in grey and Apollo X in red. Post-Printing I didn't like to have the 3D printing lines in the final...