creality cr touch 3d models
138678 3d models found related to creality cr touch.
thingiverse
I noticed that this design had not been properly adapted to the CR Touch without anything extra added onto the design and decided this would be very useful considering the benefits of the CR Touch compared to the BL Touch. The probe offset should...
prusaprinters
original BL touch was mounted in a way that blocks the mounting to x carriage mount is from thingiverse making it difficult to adjust too toolheadi am also using cr touch mount comes from satana before using voron i was using this mount. ...thanks...
thingiverse
https://www.tinkercad.com/things/9oWEAsRjrRJ-hybrid-cr-touch-and-endoscope-bracket This is not perfect - the endoscope is able to rotate more freely than I like. This also changes the Z offset of the CR Touch compared to the original bracket...
thingiverse
... 2) Attach the extruder to the mount 3) Attach the mount to the carriage with the sandwiched CT Touch 4) Attach the hot end cooling fan I raised by 5mm the holes for the attachement of the extruder so that it lie in the sweet spot of the CR Touch.
thingiverse
- Remove the CR touch from the bracket and bracket from the print head. - Slot the bracket into the print so the holes line up. - Reinstall the CR touch on the bracket through the holes in the print. - Reinstall the bracket on the print head. -...
thingiverse
I use a CR Touch rather than a BL Touch and the EVA 3.0 BL Touch is no longer compatible. I couldn't find a CR Touch connector for EVA 3.0 that was sensible/worked so I've made this one. This one fits easily where the standard EVA 3.0 BL Touch...
thingiverse
To mount this upgrade on my Creality CR-10, I browsed Thingiverse for a suitable box. The idea to mount it to the frame of the machine like the "OctoPrint Raspberry Pi Rig 3.5 PiTFT Touch Display - Mod for CR10s" by Nosferatie was appealing. The...
thingiverse
i really like Satsana remix by Nazar78 but i got a CR Touch and it just didnt have the notch for it while there is other Satsana with cr none still had all the other parts that Nazar78 did with the fan covers this is the link to get to Nazar78 model...
thingiverse
This is a remix of eecue's remix, I've taken away some material to make it lighter. ...This one is for 4010 fan and CR touch. ... Offset for my extruder: X-45.15 Y-8.28 Z-2.40
thingiverse
I used tinkercad and a cadgrab model to make this model compatible with the cr touch without decreasing the build volume. ...Read the original's desc for more details.
thingiverse
I used tinkercad and a cadgrab model to make this model compatible with the cr touch without decreasing the build volume. ...Read the original's desc for more details.
cults3d
It is a mounting part for CR-Touch used in combination with Briss fang v4.3. ... https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang
thingiverse
I had a hard time finding a cr touch mount for the bondtech ddx that was higher than the print nozzel, i modified this to have the proper offset and it fits perfect with the microswiss hotend
thingiverse
Nozzle upgrade to improve cooling of builds. ...Made for ender 3 with cr touch/Ender 3 pro Check out the original design for the second part to this upgrade.
thingiverse
Remixed the original 5015 fan duct and slimmed the left duct down to make room for the CR Touch Also added a slot for an M3 nut to utilize the rear mounting hole from the original duct
thingiverse
It is a mounting part for CR-Touch used in combination with Briss fang v4.3. ... https://cults3d.com/en/3d-model/tool/ender3-v2-dual-40mm-fan-hot-end-duct-fang
thingiverse
... tolerances are just bad and you might have to sand a bit. x_offset: -58 y_offset: -27 Be careful you don't adjust the cr-touch too high or it won't trigger in time and the nozzle will crash :) Only supports are in the image I showed. ...Good luck.
thingiverse
A remix of MathiasM74's ADXL345 mounting bracket made to support the increased thickness of the Ender X-axis gantry from the CR Touch probe. Used to calibrate input shaping in Klipper. Snug fit on my Ender 3 Pro + CR Touch gantry. Using the screw...
thingiverse
... of the fan duct or printer. Note: It would be a good idea to recalibrate your probe offsets, as the geometry is extremely close to the original CR-Touch bracket for the ender 3, but its not exact and had to be slightly modified to fit the duct.
thingiverse
... (thanks to them for providing this latter one). Here is the link to the carriage provided by Hotends.fr for the CR-10, just enlarge the holes a bit to fit it on the CR-10 S Pro: https://www.hotends.fr/en/downloads/70-smart-support-aioevo.html
thingiverse
ОписаниеКрепление датчика уровня CR-Touch для первого варианта печатающей головы авторства Дмитрия Соркина в варианте исполнения под термоблок Volcano для принтера Voxelab Aquila.Крепление отлично работает со стандартным кожухом концевика X и не...
prusaprinters
original BL touch was mounted in a way that blocks the mounting to x carriage mount is from thingiverse making it difficult to adjust too toolheadi am also using cr touch mount comes from satana before using voron i was using this mount. ...thanks...
prusaprinters
... caps I found didn't fit very well. This one is simply printed and screws into place with the existing bolts. Print Settings Printer: Creality CR-6 SE Rafts: NoSupports: No Resolution: 0.2 Filament: SUNLU PLA+ Black Category: 3D Printer Accessories
prusaprinters
Madau's original design worked great and was nice and strong, but when I got a CR-Touch probe I discovered they do not play nicely together. I removed a small piece to make room for the CR-Touch and thatdoes make the bracket slightly less stable, so...
thingiverse
... mount a try, my first time tackling this project. ...Previously, I was using another setup, but its mounting holes were tricky to reach and it never fit perfectly in place. This new design incorporates brass inserts specifically for the BL Touch mount.
thingiverse
This stand should also fit the S1 standard along with V2 and others with the same touch or dial screen. If you like or use this please send me a little support, just a pound or two (or dollars etc) at [paypal.me/MettaUK](https://paypal.me/MettaUK/...
prusaprinters
All parts are in the correct orientation for printing.The BL Touch distances are 10mm on the Y and 42.5 on the X.It's very light even though I printed it with 1.6mm walls, 1.6mm top and bottom skins and 40% lightning style infill.Print in ABS. ...Use...
thingiverse
This is a bracket for mounting a Wham Bam Mutant to a CR-10 3D printer and a bracket to mount a touch sensor so that it is not attached to the mobile plate. ... Allow the same touch sensor to be used with multiple MUTANT mobile plates.
thingiverse
I trimmed the front of this cover down so it will clear a BL Touch or a CR Touch when it auto homes. I also created a wire slot on the back rather than a hole out the side like the original. ...This is for ease of installation and I also feel like it...
thingiverse
The CR Touch connector is in a different location than the BL Touch as well as sticks out further to the left. This brings in the mount a few mm as well as relocates the connector hole. ...The cable retainer is optional.