cr 10s pro v2 upgrades 3d models

I've got a modified CR-10s Pro with a Microswiss AllMetal Hotend and a BLTouch Sensor installed. I recently purchased a Zimpure Filter System to reduce UFP and VOC emissions, but realized that no suction head was available for my specific model from...

CR-10S Pro Heater Bed Cable Strain Relief. In addition to standard printing, I've conducted rigorous torture tests to verify that it resists layer shift and excessive friction. Fortunately, no issues have arisen. By eliminating the need to drag the...

... print two and set them in place quickly. I was thrilled to discover that they fit perfectly into the tool holder tray I designed specifically for my CR-10S Pro. ... My simplified version of the leveling blocks is a breeze to use - no fuss, no muss!

This is a custom-made raspberry pi mount designed specifically for the CR-10S Pro, allowing seamless connection to the USB slot for Octoprint and other peripherals. No need to worry about clearance - there's ample space for the x-axis rail, even...

CR-10S Pro Heater Bed Cable Strain Relief. I've run some grueling tests alongside standard printing to scrutinize for layer shifts or excessive friction, and I'm pleased to report that I've encountered no issues whatsoever. As a result of not...

... ... It has been adapted for use with the Creality 10s pro and slightly modified. The locking ring is an original part of the printer. ... The tube was printed at a 90-degree rotation, while the rod was printed at a 180-degree rotation.

I built this enclosure to house a SKR 1.4 Turbo inside my CR-10S Pro.\r\n\r\nIt features mounting points for two 40x10mm (or 40x20mm) fans and the ribbon breakout board available at https://www.thingiverse.com/thing:3980507\r\n\r\nThere are holes for...

I created this project to synchronize the two lead screws on my CR-10S PRO, ensuring that printing height is maintained without having to adjust the steppers. To accomplish this, you will need: 1. A print of Z Axis Timing Belt Mod A or B 2. A print...

This duct is designed specifically for the Creality CR-10S Pro printer to incorporate the 5015 blower fan. The duct features an adapter that utilizes the original blower holes found on the printing head enclosure. To install the fan (blower), you...

CR10s PRO (V2) -Cable touching bed adjustment wheel fix -Nicer appearance -No need to disassemble anything! Would recommend supports only for "Cablemount". ... Credits for cable chain link and its cover: https://www.thingiverse.com/thing:2920060

I love the direct drive mod on my Ender 3 and I wanted to do the same for my CR-10s Pro. Since I couldn't find a direct drive conversion on Thingiverse, I used parts from a Hero_Me conversion kit and made one myself. It turned out really well and has...

(how-to reference: https://support.bondtech.se/Guide/22.+Creality+3D+CR-10S+Pro+-+Stepper+Current+Adjustment/47?lang=en) After the hardware installation and modification, don't for get to re-calibrate E-step for the new extruder and the PID for the...

... to slide into the 2040 extruded and have notches cut out for the brackets and GT2 belt. If you were using the included 100mm acrylic gauge before, this is much easier. This may work for other CR-10 models, but I'm only sure about my Pro model.

Cr10s Pro 20mm Fan

in the process of making a voron and wanted something a little better on my 10s pro, i modified a few things so the afterburner would work on my pro using the exisiting abl sensor i removed the x end stop and mounted it to the front of the pulley...

The evolutionary spool holder is designed to work seamlessly with multiple Creality printers, including the CR-10, CR-10s, CR-10s Pro, and Ender models. ...It's built to fit onto the original bracket of these machines.

(how-to reference: https://support.bondtech.se/Guide/22.+Creality+3D+CR-10S+Pro+-+Stepper+Current+Adjustment/47?lang=en) 5. After the hardware installation and modification, don't for get to re-calibrate E-step for the new extruder and the PID for...

(how-to reference: https://support.bondtech.se/Guide/22.+Creality+3D+CR-10S+Pro+-+Stepper+Current+Adjustment/47?lang=en) After the hardware installation and modification, don't for get to re-calibrate E-step for the new extruder and the PID for the...

Z Axis Connect (print 2x Lagerbock and buy 2x GT 20 Pully´s) Replace the original z-axis pulleys with custom-printed parts and upgraded GT20 pulleys, ensuring precise movement and reduced wear on the printer's components. 4. replacement cooling (ABS...

Made a funnel based filament guide for my CR10S Pro v2, but it should fit any printer using that same filament sensor. I needed this as I made a desk stand for the filament spool (can be seen in one of the picures) instead of using the standard...

Crisis Pro E3D V6 Mount Needs M3*20 screws, three in total. ...Additionally, four to five M3 screws are required, each about two inches apart.

Remixed filament Guide with 2 wheel to guide your filament from above or below,tested on Cr10s Pro also work on Cr10Max only required 2x 608 Bearing

Support de bobine pour imprimante Creality (CR-10 ou Ender) à placer sur les barres de structure 20mm x 20mm avec tube de 51 mm pour bobines diamètre intérieur 54 mm (Support.stl) Pièce de verrouillage à insérer sous la barre (Support_lock.stl) 2...

Filament Guide for the CR10S PRO Creality Printer: A Quick and Easy Printing Experience. Printing Time: Just 45 Minutes, Every Time. Infill Percentage: Optimized at a High 50%. ... Support Material: Yes, Always Available.

... but it proved longer in length, placing the fan duct perilously close to the heating block. To mitigate this issue, I designed this upgraded version to maintain a safe distance, thus preventing the fan duct from melting under the intense heat.

Remixed filament Guide with 2 wheel to guide your filament from above or below,tested on Cr10s Pro also work on Cr10Max only required 2x 608 Bearing Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: Yes Resolution: 016...

My daughter kept swiping the first screen cover I printed for my CR10S Pro, so I created a new one that attaches directly to the front of the printer via the pulley cover screws. This design uses 1.75mm filament to link two separate pieces together.

I upgraded the original fan with a Noctua 40mmx40mmx20mm unit. I designed this project in ThinkerCAD, marking my first-ever creation, so it's not flawless but functions flawlessly. It utilizes the stock fan mounting hole and required cutting down the...

The vertical mount plate is secured using the single screw on the CR-10 base, located just forward of the Z upright. A blind hole in the back clears the nearby screw on the base. #6 machine screws/nuts attach the tool holder to the mounting plate. ...I...

See my original design for more general fitting instructions https://www.thingiverse.com/thing:4099686 https://www.thingiverse.com/thing:4550007 Ender 3, CR-10 mount https://www.thingiverse.com/thing:4564423 If you find my files useful please...