anycubic kobra max upgrades 3d models

---- Ein Einfache Display-Abdeckung für ein Anycubic 4,3 Zoll Display (entworfen für ein Kobra Plus) Es sollte bei mir in erster Linie Nachts das leuchtende Display abdunkeln. ... Es dient aber auch als einfacher Schutz um versehentliche eingaben am...

... "feet"), it should snap into place on the rail and will even slide a bit so you can adjust the position. I believe this will work for both Anycubic Kobra Neo AND Go printers, and theoretically any printer with rails matching the above measurements.

This scrap box fits for Anycubic Kobra 2 (not Neo Version) as well.I liked the model very much so I decided to make it a little bit smaller (120 mm instead of 160 mm) to have a scrap box for the right sight, where the display is located, as well.The...

Die Abdeckung kann auch für das Netzteil des Anycubic Kobra Neo verwendet werden. Es wird jedoch ein anderer Abstandshalter an den Füßen benötigt: https://www.thingiverse.com/thing:5894002 *** Remix of the Air slots. Over the contact rail, the...

I wanted the holder to keep its cylinder shape so I've recreated my own version inspired from 2 other models.I've included 2 test models for fitting bearings and hexagon nuts.the body printed with 100% infill to make sure it can hold.Uses two 608Z...

An attachment to mount the Kobra 2 Filament sensor to the top of the frame I am using a Kobra 2 Max.The PTFE tube holder is optionally mounted to the attachment as well. ...this helped hold the cable up off of the build plate using the clipsI'm using...

I wanted a simple camera mount for my Kobra 2 Max, that mounted on the Z Axis that wasn't specific to one camera, as currently the AnyCubic does not support USB cameras, but will in the future, so I will likely switch it out. This is my first “thing”...

new part cooling fan duct for Anycubic Kobra WIPif using CURA Resolution .15mmprint speed 803 wallsinfill 20%3 bottoms layers3 top layersinfill line multiplier 2

made for anycubic Kobra 2. Just made the upper filament holder (another cool stuff) and put it on the top of the printer. Then the filament hangs down and nearly kinked before it moves in printer. ... So i made this thing to guide the filament...

This is my created Anchor for the Anycubic Kobra side filament system. https://www.thingiverse.com/thing:5633816 I use two M3 screws an nuts. Customized version of https://www.thingiverse.com/thing:5139044 Created with Customizer!

Improved version of the USB Holder for anycubic Kobra 2 Neo that I created.Added 4 holes for microSD cards.Fully compatible with the grips of the first version, in case you already printed it, you only have to print the central part.

... tags using Z-Offsets from 0.25 to 0.4mm. ... Variations for different nozzle sizes and perhaps temperatures to come. Printer: Anycubic Kobra Plus Filiment: PLA Layer Height: 0.3mm First Layer Temp: 210 Other layer Temp: 200 Bed Temp: 60 Nozzle: 0.60mm

new part cooling fan duct for Anycubic Kobra WIPif using CURA Resolution .15mmprint speed 803 wallsinfill 20%3 bottoms layers3 top layersinfill line multiplier 2

This is a remix from the original to house the skr mini e3 v3 motherboard and fit on an anycubic kobra. ... parts needed 4 m3x25 bolts 4 m3 lock nuts 4 m3x12 bolts 4 m3 t-nuts printed or purchased 3 m3x10 bolts reuse original 4 bolts...

Please use my Vyper-specific mount located at this link: https://www.thingiverse.com/thing:6360400 >This mount should work on Anycubic's Kobra Plus and Kobra Max models that use the same printhead assembly as shown in the pictures. It also has a...

This is a connector to mount the Anycubic Kobra 2 spool holder to the top instead of left side. I do not want to abandon the original spool holder, so I make use of it. If you do not want to use the original spool holder, instead, you'd...

Thanks to Bday988 & Ohio for their work!Loved both of these ducts so much I MIXED them together and added my own touch. REMIXED 3 Sided Fan duct for the Anycubic Kobra.Made it translucent so you can see….well nothing. It's just "cooler" to...

I created this adapter/baseplate in order to mount the JUSH system on the Anycubic Kobra (standard) . When you have only few or no space next to your printer, this is my solution for you. It features the use of the stock screws of the original...

JUSH is a remix of the famous TUSH spool holder, only better :-).I created this adapter/baseplate in order to mount the JUSH system on the Anycubic Kobra (standard) . When you have only few or no space next to your printer, this is my solution for...

Drainer for Anycubic M3 MAX tray. To print in FDM. ... Allows you to tilt the print bed so resin can flow into the tray before removing prints

... can use the Fusion 360 files as well Important! ... To use this cover, you need to have “Anycubic Kobra Squash Feet” (https://www.thingiverse.com/thing:5990893) or other new feet to lift your 3d printer You'll need: - 4x M3x26 mm Screws - 4x M3 Hex Nut

Made with Tinkercad.GER: Ganz simple Füße für den Anycubic Kobra 2 Pro. Gedruckt aus TPU werden die Vibrationen des Druckers etwas gedämpft. Die Füße passen genau auf die bereits am Drucker vorhanden Füße und halten dort von Alleine. In der Mitte...

... can use the Fusion 360 files as well Important! ... To use this cover, you need to have “Anycubic Kobra Squash Feet” (https://www.thingiverse.com/thing:5990893) or other new feet to lift your 3d printer You'll need: - 4x M3x10 mm Screws - 4x M3 Hex Nut

This is a heavy remix of Anycubic Kobra Neo Z-Axis Camera Mount - Updated by Vap3Lif3_MCMXCV.I wanted a stable mount I could easily add or remove without removing screws and potentially throwing off the x-gantry alignment. This remixed mount is...

Anycubic Kobra 3 Camera LED Quick FixUntil they sort out the LED issue in the Kobra 3 camera, here's a handy workaround for you:I've tweaked the original back-plate of the camera case so you can attach a small LED light to it. It's designed to work...

This tool box and trash bin connects to the spool holder on the Anycubic Kobra Neo 2. I assume it will connect to other models as well that have a 1 inch circular hole in the spool holder arm. ... The perfect hardware would be 25mm M4 bolts, but just...

A Top-Mount Spool Upright Bracket, designed explicitly for the AnyCubic Kobra Plus and the Dual spool system by 00monster00. https://www.thingiverse.com/thing:4174482 The model has an enhanced base that has been reinforced for increased...

I did not have space to fit the Anycubic Kobra Filament holder above the printer so removed the bracket, took off the spool holder and designed this to be screwed into a wall to hold the filament. ... I then printed one of the many filament holders...

This will fit many printers, but the height was specifically made for Kobra Max. Print in upright orientation with support. I used PLA+ and printed on a Ender 3 V2. You'll need at least one 12mm M3 screw and a channel nut to mount it. I...

This is a rotatable Anycubic Kobra Neo holder-type 2.It is difficult to make a bearing balls with Kobra neo, so I decided to buy balls. 6 Φ8 balls are used to make one bearing. Since we need 2 bearings, we need 12 balls. Φ8 balls are beads without...