anycubic kobra max tuning 3d models

This is a two-part cover for the x-axis-end of the Anycubic Kobra Neo 2 printer (may fit to other printers of this series too). Already at assembling I thougt the cables to be unsightly. Betruet (see below) had the idea of adding a second laerger...

Spool Adapter 72mm for Anycubic Kobra, replace original adapter spool!I'ts designed for Filament Spool SUNLU and similar with hole 72mm.Printable without support*.Printing at 0.2mm with 20 or more fill for better strength.I used Orange PETG.The nut...

It was designed to hold two Noctua 40mm x 20mm fans instead of the OEM 40x10 fan and OEM blower.Warning : The Anycubic Kobra Go uses 24V only. Noctua fans are 12V. You will need to use 24V fans, or supply 12V to the fans, otherwise it won't work.The...

Anycubic Filament Spool Holder Optimization Kit

Needed a stable mount for my Wyze cam for my Kobra 2 neo, so I designed this. enjoy. ...I'm pretty sure it works with the Kobra 2 as well.

Model is based on NaNO3 Filament Guide for the Vyper.The Kobra Max sadly has a screw, making it impossible to use the original version.Therefore I created a new model from scrap, based on the Original one.I added rounded edges, so the filament should...

I remixed this one because no one i've found didn't fit my kobra max properly and the air jets weren't crossing in the right place and after many many tests and fails, I've made 2 models with fan ducts inclined at 55 and 50 degrees and those at 50...

Simple diamond pattern Z-Axis camera mount for the Anycubic Kobra Neo. I used the Camera Mount for Logitech C270 on 2020 Extrusion by NikNolte on Thingiverse: https://www.thingiverse.com/thing:2426231 as reference for creating the base brackets...

What is this?This is replacement spool holder for Anycubic Kobra Go 3d printer. The main difference between this and the stock one, is that it has bearings for smooth spool rotation.But why tho?I noticed that in default configuration the spool...

I grabbed the idea to have a trash tub outside of the built plate underneath the place where the Anycubic Kobra Neo (my new printer) dumps its filament trash when loading a filament or purging the nozzle at the start of the print. I printed...

This is a spool holder designed for the Anycubic Kobra 2 Neo using the 2 threaded inserts at the top of the printer and the twist-in spool post that comes with the printer. These inserts are 30-31mm apart and are perfect for this type of design! This...

Printer filament holder for 1kg spool mounted onto the top rail of Anycubuc Kobra Plus. Slightly longer screws are needed to replace factory screws. ...

Removed extra material so that base can fit on Kobra Plus. ...Able to attach both small dragchain and widened dragchain to base.

This is a remix of the Kobra Max Direct Drive Mount . Everything fits well and doesn't flex unnecessarily. This is designed to fit the stock stepper motor and extruder. I replaced with a pancake stepper to reduce weight. To assemble: ...

... place but can be easily slid into position. Will likely work with the Kobra Go and any printer with 2040 extrusions. Step and Fusion 360 files are included. Check out my LED light bar for the Kobra Neo here: https://www.printables.com/model/516092

Clip On mount to run PTFE tubing to your Kobra.&nbsp;This is for the Standard Kobra and Clips on top.Print in PLA or PETG. ...(PETG preferred)</p><p>Do not use less then 25 infill</p><p>Part is photo was taken during .6 nozzle testing so please don't...

There are three cable clips provided with the Kobra 2, but I prefer to have a better guidance. ...Since I wasn't able to find a model of the cable clip, I quickly redesigned it.

The remix will allow the sd card to insert into the Kobra 2 slot and still push and release whereas the original would not. The slot is a tight fit since you can only grab about 2mm of the card and still get it to push in all the way. You can add a...

IMPORTANT Use it together with the Nut and Bolt part from: https://www.printables.com/de/model/417357-kobra-go-y-axis-tensioner/files For pulley mounting, you will need the m3x16 screw (x1 for each axis) and of course the 20 teeth, bore 3mm width 6mm...

*IMPORTANT* Use it together with the Nut and Bolt part from: https://www.printables.com/de/model/417398-kobra-go-x-axis-tensioner For pulley mounting, you will need the m3x16 screw (x1 for each axis) and of course the 20 teeth, bore 3mm width 6mm...

... ...when I first bought the Kobra Neo, i noticed the loom droops and even touches the bed during the first layers. this should provide enough support to get it out of the way. should not need it to be angled upwards. ... will require 2 small zip ties

Just reengineered the original Kobra 2 Hotend Housing for Fun. I dont like the original mount of Housing/Duct and Fan because it is very fragile. Here i used 2 M3 Screws (20, 25mm) to hold all in place. You also need 4 threaded inserts. ... Fanduct...

So, I found the exact thing I needed to start with and remixed it.It had to be larger to fit the Kobra screen. I made it a bit loose and attached it to the LCD housing with a bit of double sticky tape. It works perfectly. ...The print in place hinge is...

This model adapts the metal carriage of the original Kobra to be able to mount the Voron Stealthburner toolhead. ASA is the recommended material for printing this. 4 walls, 4 tops and bottoms, 25-40% infill. ...You will need four heat set inserts and...

Watch here: https://www.thingiverse.com/thing:5894002 Composed these feet from the Kobra Go Foot Block https://www.thingiverse.com/thing:5817375 and the Higher Feet Vibration Dampening https://www.thingiverse.com/thing:5566982 . You need to print...

... model to avoid this problem. Especially for the Anicubic Kobra you'll need: -on the left side 2X 19.5_cm.stl -on the right side 1X 16_cm.stl, 1X 19.5_cm.stl I also left the .f3d file of my model so that you could create your own length and width.

The tuning setup includes a centralized hub that can be customized for optimal performance, a replaceable end cap that matches the existing color scheme, and dedicated stands to hold the black and white control box securely in place.

Gerade der Kobra "federt" sehr viel. Mit dieser Führung (einfach anstelle des alten Halters mit den gleichen Schrauben befestigen) ist es möglich das Filament von der Seite - oder von oben - z.B. aus einer Drybox heraus an den Extruders zu leiten. ... ...

The tuning set serves as a central hub for the spool, which is highly customizable to meet specific needs. Additionally, it includes a replacement endcap that perfectly matches the existing color scheme. ...This setup also features a separate stand for...

I recommend the original Anycubic Hotend Fan for beginners. Even better is the NF-A4x10 FLX with a 330Ohm(max. speed) or 470Ohm resistor (1W rating) soldered into the red wire (positive +). It even comes with the right adapter for the connector and...