anet et5 3d models

... lithophane Printing: •Base required support to print. LET ME KNOW, IF YOU MADE ONE ;-) Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports:YEs Resolution: 0.2 for lethophane 0.3 for all other parts Infill: 20 - 30% Category: Household

... after printing due to differences in lengths between the two spacers in my Fusion 360 file. If you encounter issues, please let me know. Print Settings Printer: Anet A8 Rafts: No Supports: No Infill: 10% Notes: Does not require support material

This mod does not require any destructive modifications to stock Anet parts, making it completely reversible. It is crucial to note that rigorous calculations have not been conducted to ensure proper airflow, and this part has only undergone...

>> https://www.walmart.com/ip/GE-LED-Wireless-Puck-Lights-Battery-Operated-Touch-Activated-2-Pack/168006227 Corners can be printed flat without support. I use Flat Lithophane Maker >> https://lithophanemaker.com/Framed%20Lithophane.html...

The phone holder has a width of 70,2mm and a height of 8,5mm (designed for a Samsung Galaxy J3 2017). Edit 04/06/19 : I added the first custom central clip, side clips and phone holder Print Settings Printer: Anet A8 Rafts: No Supports: No...

Print Settings: Printer: ANET A8 Rafts: No Supports: No Notes: I printed these in PLA. The main piece is 5mm thick, but it could be thinner. Post-Printing I utilized a finger drill to clean up the bolt holes, but for me, the lamp 'socket' required...

Printed on a CR-10 and an Anet A8. 200deg head and 60 deg bed. PLA., Edited in Solidworks 3d Experience x-Design. 24vdc power option is here: https://www.amazon.com/MP1584EN-DC-DC-Converter-Adjustable-Module/dp/B01MQGMOKI And Here:...

This is a remix of Dousi's Anet A8 Bowden conversion, reworked with adjustments made for my Divaks E3d V6. I found that the Hotend Holder required tweaking as it seemed too short, so the Fan duct was lower than the nozzle. I added slots to the part...

Print Settings: Printer: Anet A8 Rafts: Doesn't matter Supports: No Resolution: Any Infill: 30% Notes: I highly recommend using Matterhackers' MatterControl 1.6 for USB-connected computer control of your 3D printer. This free program produces...

:) Uses my Rounded Cube Module Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.1mm Infill: 15-20% Notes: I would recommend you print with a raft or supports 'touching buildplate' to support the base of...

Print Settings: Printer Brand: RepRap Printer: Anet/Omni A8 from Gearbest Rafts: No Supports: No Resolution: .2 - .3 Infill: 20% Notes: I printed mine with 10 shells (4.0mm [I have a .4mm extruder]) which gave it almost 1/4" all the way around of...

This allows for fine tuning of printing tolerances. I run a drill bit of 3mm in the guiding holes until they moved smoothly. 3mm guiding rods, stepper motor itself as well as the screws holding the stepper in place are salvaged from old DVD drives....

The leadscrew and leadscrew nut I used were from my Anet A8. Wiring: So far, I've only tested wiring a second stepper in parallel with the original stepper, increasing current to 1 amp (Skr 1.3 with 2208). Also, my second stepper is different from...

Therefore you do not loose any of the four front facing USB-Ports, even though the Raspberry only has 4 ports total. Additional parts I used the following usb-hub as inlay for this part: USB 2.0 Hub Smile 4-Port Print instructionsCategory:...

Printing side on will result in the print being strongest where it needs to be. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.2mm Infill: At least 20% Notes: You must not print this on its back or front. ...I recommend...

I designed this in Fusion 360 with a 0.5-0.6mm tolerance. I included a small test part and both F3D files along with the actual trapped nut STL file. Print Settings Printer: Anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Notes: Print...

Print Settings Printer Brand: RepRap Printer: Anet A6 Prusa Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Notes: Plastic shrinkage is already accounted for in the models, allowing for about 0.2mm to 0.3mm. Project: Headphones Holder Project...

http://www.wilko.com/extension-leads/wilko-mechanical-segment-timer/invt/0343076 The one I printed has been tested and works well. I deeply suggest that you use the suggested print settings. Apologies for the state of the SCAD file, I may update it...

In this design you will find a Front & Rear Bumper and Rim. Added a new updated rim with spokes! Print Settings Printer Brand: Anet Printer: A8</div>Rafts: No Supports: Yes</div>Resolution: 0.2 Infill: 100%</div> Filament: [...

If you want to build one yourself, here's what you'll need to print: 11x Ring Element 3x Holder 8x Connector (you may want to scale up by 2-3%) 1x Ring Element Cable 1x Holder Cable All items are printable on a 20cm x 20cm bed (I used an ANET A8),...

Cable chain for the heatbed of the Tevo Tornado, it might also work with the CR-10 but I did not test that.I switched from my anet a8 to the tevo tornado and I missed the cable-chain for the bed. Especially because there is no strain-relief for this...

My previous version fits the original Anet A8 filament reel holder and dry box using bought PTFE connectors, but this one takes it up a notch - the entire connector is printed in-house and has worked out incredibly well so far. I use a small piece of...

Check out the second version https://youtu.be/RuMLHJW1teM https://www.thingiverse.com/thing:4976714 I am building jumping robot and this is first version of the main mechanism.It works by compressing 2 springs and later relasing them with great...

Everything printed out quickly on my Anet A8 and fitted together fairly well as I built in a little tolerance for that. After my first print, I needed to make the gap in Piece 10 a little bigger to fit the other pieces in but they should be okay 'as...

I carry my switch with me all the time, but original carrying case has a single pocket for games and joycon straps which makes fetching the game/joycon strap you want a bit hard. I designed a holder which fits in that pocket, can take up to 8 game...

Print Settings Printer Brand: RepRap Printer: Anet A6 Prusa Rafts: No Supports: Yes Resolution: 0.2mm Infill: 15% Notes: The models already account for plastic shrinkage, about 0.2-0.3mm. Project: Headphones holder Project Name Open source...

Print Settings: Printer: Anet A8 Resolution: .1 Infill: 15% Layer Height: .1 To ensure optimal results, it's crucial to pay attention to the print settings. The recommended infill percentage is 15%, and a layer height of .1 provides excellent...

pay closer attention to the clearrances between the parts Use with care Print Settings Printer: Anet A8 Rafts: Yes Supports: No Resolution: 0.3 Infill: 10% Notes: I use raft for mechanical parts to secure the bed adesion Post-Printing ============= I...

I needed a short extension for my remade anet a20. After making one, I realized it was difficult to brace it in place as the extension got in the way of the corner bracing. I decided to incorporate the extension and a corner brace in one part. This...

Modelled in 2 parts for Strength! Print the hinge sideways, to make advantage of the strength of the layers, as the piece needs to bend to get into place (and printing up-right will likely result in the piece snapping off!). First Picture shows a...