add led to ender 3 3d models

Mounting box for switch to control a light i added to my Ender 3 V2. The t-slot tabs are a little big and will need to be filed down to fit. The switch I used is no longer available from amazon but i am pretty sure the one below is the same. ... ...

This is a profile that I got from YouTube for Ender 3: https://www.youtube.com/watch?v=fadHuX2wD-Y It works really great. The only thing I modified was adding skirt/brim settings and setting the skirt offset to zero. In this way, it will print a...

What I have done here is to modify the Ender 3 V2 cover to allow room for a 40x20mm hotend fan (such as the Noctua A4x20 FLX), in addition to other changes to permit 3D printing without supports. The benefit of using this model is that it's...

Hold the Poly Swing hairspray holder firmly against the Ender 3's power supply. ...For tiny items, increase the model's size by a factor of ten before printing.

printed on the Prusa mk3s+, this petg mount is made to sit on the top of the ender 3 v2s extruder case and to screw into its heatsink temperature: extruder all layers 240c, bed first layer 85 other layers 75clayer height: .2mmnozzle diameter...

However, I was able to fit mine because I added some rubber feet to my Ender 3, which gave me a bit more clearance. The holder features one screw hole that you can secure with an M3 or M4 screw and hammer nut. While not necessary, I also added...

I relocated all the electronic components to the rear of my Ender 3 Pro. I grew very tired of having to turn the printer around to access the Micro SD card slot easily. I purchased a Micro SD extension cable so I could move the Micro SD slot back to...

I remixed user phelanp11's Ender 3 Mosquito adapter to make it compatible with the Zesty Nimble, and had to adjust the cooling fan duct to accommodate the entire assembly. This new print works perfectly on my setup after verifying its functionality.

... This script is tailored for the Ender 3 but should work seamlessly with any printer of similar dimensions (235 x 235mm). ...A sample "cube.stl" file has been included purely for demonstration purposes and does not need to be downloaded or printed.

... or pulled out pretty far. Hope this will be useful for someone else too! NOTE: * in order to re-use the original screen cover, you'll need to elevate the Ender 3 a little bit. I used these dampeners. ... https://www.thingiverse.com/thing:3316671

I designed my second part ever, a Filament guide specifically tailored for my Ender 3 Pro with its EZRstruder installed. My goal was to create a guide that would fit seamlessly into this setup. As I printed it out and prepared to test it, I knew I'd...

This Dust Filter for Creality Ender 3 attaches to the filament motor and PTFE screw with ease, perfect for those who have nowhere else to put it. You won't need to detach this filter when changing filament. It works seamlessly with both 2.85mm and...

The V1 may reduce the effectiveness of the fan. For the V2 I moved it mainly to the back of the printer, so it doesn't decrease the effectiveness. The fan screws need to be tight, or else it becomes loud. Print Settings Printer Brand: Creality...

This is a remix from "https://www.thingiverse.com/thing:3437455/remixes" modified to fit with this Direct Drive mount "https://www.thingiverse.com/thing:3373107" I've been using this Direct Drive mount for years on all of my Ender 3, it fits like a...

This is a remix from "https://www.thingiverse.com/thing:3437455/remixes" modified to fit with this Direct Drive mount "https://www.thingiverse.com/thing:3373107" I've been using this Direct Drive mount for years on all of my Ender 3, it fits like a...

 If you are interested in a display cover with demonstrated compatibility, this one works: https://www.printables.com/model/431937-ender-3-pro-display-cover-twin-dragons Printed using supports under the encoder flanges.Big thanks for Punkeloment for...

This is part of my Ender 3 single stepper dual Z system. Find all parts here: https://www.thingiverse.com/thing:4583416 - Dual Z plate https://www.thingiverse.com/thing:4581014 - Fully adjustable Z rod mounts / stabilizers ...

I strongly recommend printing it with 100% infill to get maximum strength, especially for the snap-on clamps My other designs for the Ender 3 (Pro): Octoprint Raspberry Touchscreen Box Remix https://www.thingiverse.com/thing:4062202 Flexible...

Remix of https://www.thingiverse.com/thing:3484372 by charlatan154 This fits on non Meanwell/Standard PSU as well, I made to suit 25mm Noctua fan on my Ender 5. ... Note if putting on Ender 5 you will need to cut bottom plate and raise whole printer up...

PSU Cover I designed for my 120mm quiet fan I had lying around. ...Requires custom feet to raise the printer a bit.

I built an Ender 3 Pro to Switchwire Conversion Rev.2 printer (https://github.com/boubounokefalos/Ender_SW/tree/Rev.2)I have the Fysect S6 main board which didn't fit into the original electronics layout, prompting me to rearrange the configuration...

Printed Components (1 Component): 1x Cooling Duct with LED Extra Components (3 Components): 1x LED Chip COB 12V (Found on Ebay / See image as reference) 1x 100 Ohm Resistor [Amazon Resistor Assortment...

This was inspired by "Ultimate Sturdy Octoprint / Pi Camera Mount - Ender 3 - Stewpercharged" (https://www.thingiverse.com/thing:3374914) I had originally set out to print just that but the slicer estimate of 9+ hours while printing it vertically...

Remixed this part to add regular nuts instead of threaded inserts. ... Printed with CCTREE CF filament on Artillery Sidewinder X1.

... as well. The side mount itself was a remix from this design: https://www.thingiverse.com/thing:2917932 Printer: Ender 3 V2 Support: Non on the main piece, with tree support on the top side mount. ... Infill 25% (this could likely be 10% or less)

Whilst waiting for my real honeycomb bed to arrive I remixed this one by Manu D to fit an Ender 3.I reduced the size of the honeycomb to 210mm x 210mm and then added space for four 17mm x 5mm magnets.Note the positioning of the magnets means that the...

It might be neccesery to grind the big hole in the middle with sandpaper to fit the z-nut properly.For detailed information referhttps://github.com/Creality3DPrinting/Ender-3If you can see, i changed the steppers earlier for better performance.But...

If you have an idea for an Ender 3 (Pro) thing, feel free to share it in the comments! **UPDATE 01/19/2020:** I've updated to v3. Changes include: * Moving the optional embossed Creality dragon logo to the top * Tightening the fit * Slimming down...

https://www.thingiverse.com/thing:6348204 this guys helmet, just cut to fit a ender 3also in-case you were wondering how to cut big models to fit a small printer, i used slic3r with the cut function to cut it up then export the models

This is an adapter for the Ender 3 Pro Printer. Instead of using the ribbon cable adapter, this uses the attached Cablecc SD card adapter. If your TF card adapter spring is worn and does not hold the TF card in, this will actually fix that problem....