3d printed gopro drone mount

GoPro Tripod Mount 1/4-20 nut required Print Settings Printer Brand: Monoprice Printer: Maker Ultimate Infill: 20% Filament: AMZ3D PLA Orange Notes: 1/4-20 Nut required Category: Camera

Simple GoPro mount for the MQC One. ...Print Settings: Rafts: They're completely optional Supports: Absolutely not required Resolution: A precise 0.2 millimeters Infill: With a dense 30% density

Mounts GoPro to KeyMod rail system. Hardware: https://www.amazon.com/KeyMod-Screws-Wrench-Storage-BOOSTEADY/dp/B06XCRZLQV/ref=sr_1_8?ie=UTF8&qid=1506287056&sr=8-8&keywords=keymod+hardware Happy Printing! ... -A

I designed a straightforward and effortless GoPro-style mount that also turned out quite visually appealing. To bring it to life, I used PLA as the printing material. ...So far, it has been performing its function flawlessly.

Remixed this mount as the tabs were spaced too loosely for my gopro 8 and allowed the tabs to bend when tightening. Also added some fillets for strength. ... Print with 100% infill in PC/PETG/ABS.

GoPro Mount for helmets with a curved underside to fit well on spherical surfaces. Rough the surface and use a good double sided tape. ...For best strength I suggest printing it standing with supports.

GOPRO threaded bottle top mount lets you grab it with ease, even if your camera takes an unplanned swim. ... Print Settings: Printer: Tevo Tarantula Raft Support: Not required Infill Density: 50%

I customized a GoPro mount to make it visually appealing, attaching it to one of my wings. ...I haven't printed it yet, but I plan to use TPU material and a very lightweight infill for optimal results.

Holder Mount for GoPro Sessions Fusion 360 and step files included. ... Printed with supports, especially for large openings, but dialing in your printer settings may allow you to skip this extra step.

GoPro/Action Camera Mount for QAV250 Print Settings Rafts: We don't care about rafts. Supports: No rafts are needed. Resolution: A resolution of 0.1 mm or more is a must. ...Infill: Solid infill is the best choice.

... the front. A screw hole for a tripod mount is also included. Depending on the precision of the print, you might need a small dot of bluetac or something similar to secure the GoPro tightly. ... Dimensions: 11.5 cm wide, 5.8 cm high, and 8.6 cm deep.

I redesigned this mount to be printed with the rear side of the mount on the print bed, there are also other minor changes. I found the original design to break easily along the 'neck' when the GoPro took hits. By printing the mount with the rear...

... Remix: https://www.thingiverse.com/thing:4796270 I have uploaded 3 VERSIONS V1: the mount is separated, ideal for printing with PLA / PETG. V2: support is attached, ideal for printing with TPU. V3: reinforced version, ideal for printing with TPU.

You may need to tweak the design to suit your 3D printing settings and preferences. In my case, I had to file down some areas to ensure a snug fit for my GoPro. ... Don't forget to securely fasten the M5 nut in place using glue or another suitable...

... quickly and is very similar to the original with minimal play between the parts. UPDATE: I've published an updated version which is much stronger and even more similar to the original GoPro mount. ...I strongly recommend printing this one instead.

Never loose Your GoPro in the water again! ... Floating (water tight) GoPro handle. Compatible with all GoPros. Default mount. You will need M5 nut (optionally photographic nut (1/4) for bottom mount). ...

Mounting a GoPro accessory has never been easier, thanks to this versatile clip that securely attaches to GoPro mounts. ...I successfully utilized it to attach a protective case directly onto a ruggedized chest harness for my GoPro camera.

GoPro 8 mount to protect the camera with adjustable angle and GoPro "ears" Print Settings Printer: Voron 0.1 Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Sainsmart TPU Notes: Print standing on the side, camera hole upwards.

Print Settings: Printer: M3D micro Rafts: Yes Supports: Yes Resolution: Medium Infill: 100 Post-Printing: Remove the support from the printer with a GoPro Bolt and a knife. Be careful, as the nut space/hole is quite tight; clean it thoroughly with...

I'm designing a GoPro mount for my Leaco RD-210 frame, keeping things simple and affordable. The angle I've chosen is about 20 degrees, which should provide a great view. To ensure stability, I'll print the model's name on the flat base of the mount....

It mounts to the gopro attachment on my iFlight Chimera 7. It houses a micro servo above the camera and the servo horn presses down on the shutter button. This is a very custom design that will only work for an Olympus Mju-1. It may not even work...

UPDATE 9/21/16: I printed out the second file to attach my DSLR to a GoPro mount and realized I miscalculated how thick to make the base. When I tried printing it and attaching the camera, the screw was too long. ...Therefore, I created a spacer so you...

Below are the specifications used for this particular design: - GoPro captive rod diameter: 3.8mm - GoPro rod nut thread diameter: 3.6mm - GoPro bar diameter: 3.2mm - GoPro rod nut outer diameter: 8.05cm - GoPro bar screw diameter: 3mm - Extended...

... a striking display of the model in any location in your home. The wall mount uses a large 3D printed plate to distribute the weight of the set to the wall mount frame and has multiple connection points to the set to ensure a secure and stable fit.

A clean simple 3D printed wall mount for the LEGO BMW M 1000RR 42130. The wall mount displays the bike using a single wall fixing and connects to the bike using the original technic pin mounting method used on the original stand. ...Also included is a...

Key Features: * Gopro Bar Gap: 2.4 mm * Gopro Bar Screw Nut Diameter: 6.01 mm * Gopro Extension Length: 50 mm * Primary Mount Type: Triple * Secondary Mount Type: Clamp * Gopro Rod Nut Outer Diameter: 8.05 mm * Gopro Captive Rod Inner Diameter: 3.8...

The design includes the following specifications: gopro_rod_nut_th = 3.6, gopro_bar_rod_d = 27.5, gopro_secondary_rotated = 1, gopro_captive_rod_id = 3.8, gopro_ext_th = 3, gopro_bar_screw_d = 3.1, gopro_bar_screw_nut_d = 6.01,...

A specially designed mount for ImmersionRC Vortex, made specifically to fit a GoPro Hero 3+, allows users to attach a LayerLens and strap securely. This unique design also includes recesses for the LayerLens frame, power button, and front LEDs. For...

This is a mount for your backpack without any other attachments - it still has original GoPro support.\r\n\r\nJust print it, attach it to your bag and enjoy hiking or whatever you'd like to do!\r\n\r\nAdd this mount to your backpack with no...

GoPro Hero 5-6-7 Mount for Hyperlite Flowride Frame. Printed directly onto the frame, no support needed. Fits tightly, works seamlessly with TPU; however, it's unclear whether a non-flexible filament will accommodate your GoPro. The slot located...