3d print apple tv mount

... 60x45x128 millimeters in its primary pocket size. ...A convenient side pocket is designed specifically to hold an Apple TV remote. To secure the cable mount and holder, they must be attached firmly to the designated area. ...Enjoy your experience!

Print Settings Printer Brand: Anycubic Printer: i3 Mega S/Pro Rafts: No Supports: No Resolution: 0.2 mm Infill: 15% Filament: Eryone PLA Galaxy Black Post-Printing ============= Bei Bedarf 4 Silikonfüße (8 mm) und 2 Moosgummistreifen (10x24 mm) in...

PLA printed tv/monitor mount for both the tv/monitor and wall, the rails are already aligned so they dont need to be edited whatsoever, however the distance between the holes on the bracket that attaches to your tv/monitor might so i'd double check...

I designed this nifty apple remote holder because I keep losing mine in the couch. Thanks, Apple. It gives the remote a little bit more of an ergonomic grip and some bulk to make sure it doesn't slip into unwanted spaces. ... The tolerances are...

Printed with Ultimaker 2+ 3D printer. Material: Original Ultimaker PLA. ... Precision: 0.15mm.

An assembly of a articulated TV wall mount.

Eine kleine Ablage für die Siri Remote des Apple TVs. Die erhältlichen Modelle für stehende Lagerung sind mir für den Nachttisch zu umständlich (friemelig) und laufen leichter Gefahr unabsichtlich umgestoßen zu werden. Das angebotene Modell...

Knowing my 3D printing robot could come in handy (he often teases me about it), he requested measurements of the TV for a custom design. Inspired by the Trik tripod adapter, I used the original STL file to create a new model. After successful...

Unfortunately, I still haven't brought it to life through 3D printing. For optimal results, I recommend using thick walls and a dense infill design. Prior to printing, I utilized Fusion360's simulation tools to test its strength, and it should...

The added support bottom of remote below siri button easily cracks off after print. Thanks for original design i modified. https://www.thingiverse.com/thing:1335599 This object was made in Tinkercad. ...Edit it online...

I wanted a way to combine these two techs....but mostly WHERE IS THE DANG REMOTE!You must print it at .2mm or .1mm for this print to work!It has very tight tolerances, so print a little slower or scale the whole thing up 1-3% if you run into issues.

... magnets that I used. Just put a pause in the slicer before your 3d printer covers that area up and slip in your magnets. The cavity is 3.2mm tall, so it shouldn't cause any print strikes if you put the pause in correctly. Good luck! ...

Crafted exclusively with cutting-edge technology from 3D Slash!

... bulge off the back of the case and carved out two openings to hold 8mm magnets in place. I also fabricated a mounting plate that secures two 8mm magnets as well. The mount plate is fastened to the entertainment center using a pair of command strips.

Printed in polymaker TPU, no supports. 

This item can be installed using two drywall screws or by applying double-sided adhesive. ...Additionally, it features a cross brace that is secured with glue for enhanced stability.

I wanted to be able to have our remote handy and my first attempt (a “basket”, non-magnetized), while usable, was a pain.  With a simple magnetic grip, this is turning out to be great!The holes are made for 10mm x “2mm” neodymium magnets.  The ones I...

Customized version of https://www.thingiverse.com/thing:3255257 Created with Customizer! ...https://www.thingiverse.com/apps/customizer/run?thing_id=3255257

I wanted to be able to have our remote handy and my first attempt (a “basket”, non-magnetized), while usable, was a pain.  With a simple magnetic grip, this is turning out to be great!The holes are made for 10mm x “2mm” neodymium magnets.  The ones I...

Made with the iPhone 12 in mind but should work with all models.iPad Mini also fits.

Scale this up 125% in slicer. ...Has charging port for lightning cable, would probably fit USB-C cable too.

Bike mount for apple airtag

It should be fine printed with several perimeters and a heavier infill if you's using a MK3s.The bolt pattern on the back of my tv was 200mm x 100mm exactly, i included the step file so you can modify the screw holes to match your tv. Mount the...

<p>Remixed original in PrusaSlicer 2.4.0 by adding a negative volume to expand the remote opening. ...Printed with Polylite PLA, 0.3mm DRAFT, and 10% infill.

I'm installing a custom TV mount for my PS4 camera on my Samsung TV, a DIY project that's turning out great so far! The mount is printed in green, which was the only colour I had available on my printer at the time, and it's still very much a...

Remixed of the original to add a keyring holder to the bottom of the bumper. ... Small addition, but really useful if your kids keep losing the remote control. While I printed it in TPU, I think I could have used PLA or PETG.

... Siri Remote dock, designed to securely cradle your device in place. ...The sturdy construction ensures a snug fit, allowing for confident lifting without the risk of the remote toppling over. For an optimal result, consider printing at 100% scale.

little thing I made on tinkercad took https://www.thingiverse.com/thing:4880515 and added an airtag hole and made it thicker other thing I would do is add a magnet to it while printing to allow it to attached to the fridge or something else.

little thing I made on tinkercad took https://www.thingiverse.com/thing:4880515 and added an airtag hole and made it thicker other thing I would do is add a magnet to it while printing to allow it to attached to the fridge or something else.

The print on this holder is slightly rough and could use some sanding to smooth out any sharp edges. However, once sanded, it becomes a sturdy and reliable tool for holding the remote in place. ... This innovative design ensures the remote is always...